BATCHGE0=0, PDDETSTS0=0, IDPSINKE0=0, VDPSRCE0=0, IDMSINKE0=0, VDMSRCE0=0, IDPSRCE0=0, CHGDETSTS0=0, RPDME0=0
BC Control Register 0
| RPDME0 | D- Pin Pull-Down Control 0 (0): Pull-down off 1 (1): Pull-down on |
| IDPSRCE0 | D+ Pin IDPSRC Output Control 0 (0): Stop 1 (1): 10uA output |
| IDMSINKE0 | D- Pin 0.6 V Input Detection (Comparator and Sink) Control 0 (0): Detection off 1 (1): Detection on ( Comparator and sink current on ) |
| VDPSRCE0 | D+ Pin VDPSRC (0.6 V) Output Control 0 (0): Stop 1 (1): 0.6V output |
| IDPSINKE0 | D+ Pin 0.6 V Input Detection (Comparator and Sink) Control 0 (0): Detection off 1 (1): Detection on ( Comparator and sink current on ) |
| VDMSRCE0 | D- Pin VDMSRC (0.6 V) Output Control 0 (0): Stop 1 (1): 0.6V output |
| Reserved | This bit is read as 0. The write value should be 0. |
| BATCHGE0 | BC (Battery Charger) Function Ch0 General Enable Control 0 (0): Disabled 1 (1): Enabled |
| CHGDETSTS0 | D- Pin 0.6 V Input Detection Status 0 (0): Not detected 1 (1): Detected |
| PDDETSTS0 | D+ Pin 0.6 V Input Detection Status 0 (0): Not detected 1 (1): Detected |
| Reserved | These bits are read as 000000. The write value should be 000000. |